Extron electronics DMP 128 Plus User Manual page 27

Figure 28. Connect to device... TCP/IP, USB, and RS-232 Dialog Box
3. When a connection with a device is established, the
box opens.
Figure 29. Synchronize with Device Dialog Box
a. Pull — Pulls the configuration file, presets, macros, and ACP configurations from
the device and displays it in the DSP Configurator main workspace.
b. Push — Pushes the configuration file, presets, macros, and ACP configurations
open in DSP Configurator to the connected DMP 128 Plus. This will overwrite any
configuration currently on the device.
Click
Advanced...
figure 30).
NOTE: If only pushing selected presets, the preset selection dialog box opens
after clicking
OK
Figure 30. Advanced Push Options Dialog Box
to open the
Advanced Push Options
on the
Advanced Push Options
DMP 128 Plus • DSP Configurator Software
Synchronize with Device
dialog box (see
dialog box.
dialog
19