Virtual Return Filter Block; Virtual Return Dynamics Block - Extron electronics DMP 128 Plus User Manual

Fixed Filters Tab
Figure 87.
Fixed Filters Tab — Provides access to fixed filter configuration options.
1
Fixed Filters List — Displays up to 5 fixed feedback suppression filters.
2
Filter Parameters — Configure the
3
each fixed filter using the text boxes.
Single Filter Bypass Button — Bypasses only the filter associated with that filter slot.
4
When the button is red, the filter is bypassed.
Clear All Button — Clears all fixed filters from the list.
5
Bypass FBS Button — Bypasses the FBS processor. When the button is red, FBS is
6
bypassed.
Set Defaults Button — Resets parameters on all tabs to their default values and
7
positions.
OK Button — Confirms changes made to the contained parameters and closes the
8
Feedback Suppressor
Cancel Button — Reverts any changes made to the contained parameters back to
9
their states when the current instance of the
opened and closes the dialog box.
Feedback Suppressor Help Button — Opens the
¢
the DSP Configurator Help file for further assistance in understanding and operating the
feedback suppression processor.

Virtual Return Filter Block

One filter block is available for each virtual return channel. This filter block functions the
same as the mic/line input filter block (see
on configuring the virtual return filter block).

Virtual Return Dynamics Block

One dynamics block is available for each virtual return channel. This block functions the
same as the mic/line input dynamics block (see
information on configuring the virtual return dynamics block).
Feedback Suppressor Dialog Box - Fixed Filters Tab
dialog box.
Fixed Filters Tab
1
Fixed Filters List
2
Filter Parameters
3
Single Filter Bypass Button
4
Clear All Button
5
Bypass FBS Button
6
Set Defaults Button
7
OK Button
8
Cancel Button
9
Feedback Suppressor Help Button
¢
, , and
Frequency Boost/Cut
Feedback Suppressor
Feedback Suppressor
Input Filter Block on page 26 for information
Input Dynamics Blocks
DMP 128 Plus • DSP Configurator Software
parameters for
Q
dialog box was
topic of
on page 32 for
52