Input Pre-Mixer Gain Block - Extron electronics DMP 128 Plus User Manual

12x8 prodsp digital matrix processor
Hide thumbs Also See for DMP 128 Plus:
Table of Contents

Advertisement

Automixer Gate Monitoring
Automixer gate monitoring allows the user to track when an automixer gate opens or closes.
This feature can be enabled by checking the
(see
figure
channel, an unsolicited message is sent when the gate has opened or closed. The response
will include the Automixer OID, gate open or closed status, and the signal level immediately
after the status has changed (see the
page 146 for SIS response syntax).
Comparing the automixer gate threshold setting to the gate status in the response will
indicate whether the automixer gate has opened or closed. When the gate status in the
response is
is less than

Input Pre-Mixer Gain Block

Double-click the pre-mixer
Figure 70.
The
Pre-mixer Gain
after input processing occurs and before it is sent to the mix matrix.
Figure 71.
Input Name — This name changes to match the default or user defined input name.
1
Pre-mixer Gain Fader — Click and drag the gain fader to provide up to 12 dB of gain
2
or 100 dB of attenuation in 1 dB steps. Click the fader and use the
<Down Arrow>
Pre-mixer Gain Text Box — Enter a gain or attenuation value in 0.1 dB steps.
3
Mute Button — Mutes signal at the pre-mixer stage, preventing it from reaching the
4
mix matrices.
OK Button — Confirms changes made to the contained parameters and closes the
5
Pre-mixer Gain
69,
on the previous page). When automixer gate monitoring is enabled for a
7
Automixer Gate Monitoring
or greater, the gate has opened, and when the gate status in the response
1024
, the gate has closed.
1024
block to open the
Gain
Input Pre-mixer Gain Block
dialog box provides controls to boost, attenuate, and mute the signal
Input Name
1
Pre-mixer Gain Fader
2
Pre-mixer Gain Text Box
3
Mute Button
4
OK Button
5
Cancel Button
6
Pre-mixer Gain Help Button
7
Input Pre-mixer Gain Dialog Box
keys to adjust the fader up or down in 1 dB steps.
dialog box.
checkbox in an
Monitor Gate
commands on
Pre-mixer Gain
DMP 128 Plus • DSP Configurator Software
dialog
Automix
dialog box.
or
<Up Arrow>
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmp 128 plus cDmp 128 plus c v atDmp 128 plus c vDmp 128 plus c at

Table of Contents