Finding A Dante Device Ip Address - Extron electronics DMP 128 Plus User Manual

To rename a DMP 128 Plus AT transmitter:
1. Select
<Ctrl+D>
2. From the
DMP 128 Plus AT (see figure 183,
3. On the
4. Click in the
renamed. A text box and cursor appear (
5. Enter a new name (up to 31 characters) using any combination of letters, numbers, and
special characters except for
6.
Press
7. Repeat steps 4 through 6 to rename additional transmitter channels.
8. When finished renaming transmitters, close the
Figure 183.

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
the DMP 128 Plus AT in Dante Controller
NOTE: If the DMP 128 Plus AT has not been renamed, its default name consists of the
product name followed by a hyphen, plus the last 6 digits of the device MAC address
(for example,
1. Open Dante Controller.
2. On the
figure 184,
3. On the
Device Name
column (
is
192.168.11.120
Figure 184.
from the
Device View Device
on the keyboard. The
Device View
(Select a Dante Device...)
screen, select the
Device View
column to the right of the name of the transmitter being
Channel Label
,
@ =
on the keyboard to confirm the name, or click another label text box.
<Enter>
Device View Screen — Renaming a Transmitter
).
DMP128P-0ee8ee
Dante Controller-Network View
below).
1
page, locate the name of the DMP 128 Plus AT in the
Device Info
column ( ). The IP address is located in the
2
). In the example below, the IP address for the connected DMP 128 Plus AT
3
.
Device Info Page
menu on the
Network View
dialog box opens.
drop-down menu, select the name of the
below).
1
tab ( ).
Transmit 2
).
3
, and (period).
.
Device View
on page 111).
screen, click the
Primary Address
DMP 128 Plus • Dante Controller
screen or press
dialog box.
Renaming
tab (see
Device Info
115