Extron electronics DMP 128 Plus User Manual page 112

5. In the panel graphic on the left side of the
button labeled is highlighted (yellow). When a button is highlighted, it is selected for
OFF
configuration.
6. From the
Control Type
for the
• Action-Fixed
• Action-Follow Selector
selector button.
If was chosen:
Action-Fixed
a. From the
Mute Master
output channels.
If
Action-Follow Selector
7. From the panel graphic on the left side of the dialog box, select the mute button labeled
( ).
ON 6
8. From the
Control Type
for the
•
Action-Fixed
• Action-Follow Selector
button.
NOTE: The same control type chosen for the
the mute button.
ON
If was chosen:
Action-Fixed
a. From the
Mute Master
output channels.
If
Action-Follow Selector
Figure 170. Configuring Mute Off and Mute On Buttons
Configure ACPs
drop-down (see figure 170,
button to unmute all output.
OFF
for the button to unmute a group defined by a
OFF
drop-down ( ), select the mute group containing all
5
was chosen, the button is fully configured.
drop-down ( ), select either:
7
button to mute all output.
ON
for the button to mute a group defined by a selector
ON
OFF
drop-down ( ), select the mute group containing all
8
was chosen, the button is fully configured.
DMP 128 Plus • Audio Control Panels
dialog box, the mute
below), select either:
4
mute button should be chosen for
104