Device Settings; Unit Info; Ip Settings - Extron electronics DMP 128 Plus User Manual

Device Settings

The
DMP 128 Plus. Select
box.
Within the
•
•
NOTE: Device settings are only available when connected Live to a DMP 128 Plus.

Unit Info

The
number, and device MAC address. Click in the
the listed naming parameters. Click
Figure 153.

IP Settings

The
subnet mask, and DHCP status of the unit. The checkbox to the left of each parameter
must be checked before any changes can be made to that parameter. Click
the changes.
NOTE: Changing DHCP from
Figure 154.
dialog box provides access to general settings of the
Device Settings
Tools > Device Settings
dialog box, the following tabs are available:
Device Settings
Unit Info
Serial Settings
tab displays the unit name, firmware version, device model, device part
Unit Info
Unit Info Tab in Device Settings Dialog Box
tab allows the user to view and edit the IP address, gateway IP address,
IP Settings
(192.168.254.254).
IP Settings Tab in Devices Settings Dialog Box
to open the
• IP Settings
Date/Time
•
Unit Name
to save the changes.
Apply
to resets the IP address to the factory default
On Off
DMP 128 Plus • Configuration Tools
dialog
Device Settings
• Passwords
Dante Device
•
field to rename the device within
to save
Apply
89