Naming An Input Channel; Input Building Blocks - Extron electronics DMP 128 Plus User Manual

Naming an Input Channel

1.
Click the input name field.
Figure 35.
2. Highlight or delete the text and enter a new name.
Figure 36.
3. Press
name. Press
Figure 37.
NOTE: Follow the same procedure to edit an input name.

Input Building Blocks

Extron building blocks are a quick configuration tool that can significantly reduce
configuration time. An input building block is a collection of processor and gain settings for
an input processing chain. These building blocks have been designed by Extron based on
extensive use and testing with each intended application or specific device.
Figure 38.
Click the input number (see figure 38 above) to open the
Building Block Folders
1
General Building Blocks
2
Add a Building Block Button
3
Figure 39.
Input Name Field
New Input Name
or navigate away from the field to confirm and apply the new input
<Enter>
key to navigate to and highlight the next name field.
<Down Arrow>
Renamed Input
Accessing Input Building Blocks
Input Building Blocks Dialog Box
Building Blocks
Delete a Building Block Button
4
New Folder Button
5
Building Blocks Help Button
6
DMP 128 Plus • DSP Configurator Software
dialog box.
22