Extron electronics DMP 128 Plus User Manual page 43

Limiter
Figure 59. Limiter Dialog Box
Limiter Channel Name — This name changes to match the default or user defined
1
input name.
Limiter Graph — Graphically displays limiter parameter settings. Parameters can also
2
be adjusted using this graph. Click and drag the dot on the graph to adjust the limiter
.
Threshold
Limiter Parameter List and Control — Lists all configurable parameters for the
3
limiter. Text fields are available to adjust
. Click and drag sliders to adjust
Release Time
. Click a slider once and use the
Release Time
keys to adjust the respective parameter in 1 ms steps. Select the
to provide a more gradual implementation of limiting when the signal reaches the
threshold.
Bypass Button — Bypasses the limiter. When the button is red, bypass is enabled.
4
Set Defaults Button — Resets all limiter parameters to their default values. To view
5
individual parameter default values, see the DSP Configurator Help file by clicking the
button (
Dynamics Help
OK Button — Confirms changes made to the contained parameters and closes the
6
dialog box.
Limiter
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
closes the dialog box.
Dynamics Help Button — Opens the
8
DSP Configurator Help file for further assistance in operating dynamics processors.
Limiter Channel Name
1
Limiter Graph
2
Limiter Parameter List and Control
3
Bypass Button
4
Set Defaults Button
5
OK Button
6
Cancel Button
7
Dynamics Help Button
8
,
Threshold
Attack Time
<Left Arrow>
) and navigate to the
8 About Dynamics
Limiter
Dynamics Operation
DMP 128 Plus • DSP Configurator Software
, , and
Attack Time Hold Time
, , and
Hold Time
and
<Right Arrow>
checkbox
Soft Knee
topic.
dialog box was opened and
topic of the
35