Web Pages; Dmp 128 Plus Web Page; Accessing The Embedded Web Page - Extron electronics DMP 128 Plus User Manual

Web Pages

This section describes Web page operation and control of the DMP 128 Plus and covers
the following topics:
•
•
•
The DMP 128 Plus can be accessed by a PC or control system using a rear panel Ethernet
LAN port (non-V models) or LAN/VoIP port (V models only) and a Web browser such
as Microsoft
DMP 128 Plus, one for general configuration and one for VoIP configuration (V models only).
These Web pages are factory-installed HTML pages and cannot be erased or overwritten.
NOTE: If the Ethernet connection to the device is unstable, try turning off the proxy

DMP 128 Plus Web Page

Accessing the Embedded Web Page

1.
2.
3.
DMP 128 Plus Web Page
DMP 128 Plus VoIP Web Page
Special Characters
Internet Explorer. There are potentially two Web pages installed on the
©
server in the Web browser. In Microsoft Internet Explorer, click
Options > Connections > LAN Settings
then click .
OK
From a Web browser, enter the device IP address into the address field.
NOTE: If the local system administrators have not changed the IP address, and
the device has not been assigned an IP address via DHCP, the default address is
.
192.168.254.254
Press . The device checks the password protection status, if a password is
<Enter>
required, enter the password in the
username is required.
The device checks several possibilities in the following order and responds accordingly:
a. If the address includes a specific file name, such as
192.168.254.254/file_name.html
b. If there is a file in the device memory named
as the default startup page.
index.html
c. If a and b do not apply, the device downloads the factory-installed default startup
page,
nortxe_index.html
, uncheck the
Use a proxy server...
dialog box and press
Connect to...
, the device downloads the Web page.
index.html
, also known as the
System Status
DMP 128 Plus • Web Pages
Tools > Internet
,
. No
<Enter>
, the device downloads
page.
164