Extron electronics DMP 128 Plus User Manual page 181

NAT Traversal
NAT Traversal Configuration
1
STUN Server Address
2
STUN Port
3
TURN Server Address
4
Figure 208. VoIP Network NAT Traversal Page
NAT Traversal Configuration — From the drop-down, select
1
,
STUN Server TURN Server
by the system.
NOTE: When NAT Traversal is set to STUN/TURN (ICE), both STUN and TURN
fields can be completed. ICE then automatically determines the appropriate
method for traversal.
STUN Server Address — Specify the IP address or domain name of the STUN server
2
to be used.
STUN Port — Specify the port number of the STUN server.
3
TURN Server Address — Specify the IP address or domain name of the TURN server
4
to be used.
TURN Port — Specify the port number of the TURN server.
5
TURN Username (optional) — Enter the username for the TURN server, if one is
6
required.
TURN Password (optional) — Enter the password for the TURN server, if one is
7
required.
Apply Button — Click
8
NOTE: When changes are committed with the Apply button, network services on
the DMP 128 Plus restart. This process can take up to 30 seconds.
NOTE: For more information regarding VoIP network configuration, refer to the
DMP 128 Plus product page on www.extron.com.
TURN Port
5
TURN Username
6
TURN Password
7
Apply Button
8
, or
STUN/TURN (ICE)
to commit changes.
Apply
(default),
Disabled
as the NAT traversal method used
DMP 128 Plus • Web Pages 173