Date/Time - Extron electronics DMP 128 Plus User Manual

Date/Time

Using the navigation buttons (
the right of the
To set the date and time:
1. Click the
time on the connected PC.
2. Set the time zone by using the
3. Use the
off (default).
-or-
1. Enter the desired date in the
selection.
2. Enter the desired time in the
then clicking on the minutes and entering the number of minutes.
3.
Set the time zone by using the
4. Use the
off (default).
NOTE: The information displayed in the
information to reflect the current time, click
Figure 157.
) is required to view the
tab.
Serial Settings
button to sync the date and time information with the date and
Set Local
Zone
radio buttons to enter the daylight saving region, or leave
Daylight Savings
field. A drop-down calendar is available for date
Date
field by clicking on the hours and entering the hour,
Time
Zone
radio buttons to enter the daylight saving region, or leave
Daylight Savings
Date/Time Tab in Device Settings Dialog Box
Date/Time
drop-down.
drop-down.
tab is static. In order to update the
Date/Time
.
Refresh
DMP 128 Plus • Configuration Tools
tab, as it is located to
91