Extron electronics DMP 128 Plus User Manual page 179

4. Select the
QoS DSCP
automatically configure layer 3 QoS.
NOTE: VLAN ID, QoS PCP, and QoS DSCP values read from the network and
applied to the DMP 128 Plus overwrite any manually specified values.
5. Select the
Inventory
number, and firmware details to the network switch.
6. Select the
Civic Location
panel. This is useful when logging the physical location of the
Civic Location
DMP 128 Plus for network management purposes.
Apply Button — Click the
3
the device.
Transport
Transport Protocol Configuration
1
Use Secure RTP (AES CTR) Checkbox
2
TLS Mode Drop-Down
3
Local Mode Drop-Down
4
Figure 207. VoIP Network Transport Page
Transport Protocol Configuration — Select
1
protocols.
NOTE: When is selected, the listening port changes from
TLS
listening port can be manually adjusted.
Use Secure RTP (AES CTR) Checkbox — Check this box to encrypt RTP audio
2
streams using the AES CTR cipher.
checkbox to read DSCP values from the network and
checkbox to send the DMP 128 Plus model number, part
checkbox to send the location details entered into the
button to commit Qos and LLDP-MED changes to
Apply
Local Cert
5
Private Key
6
Server Certs
7
Apply Button
8
(default),
UDP
, or transport
TCP TLS
to . The
5060 5061
DMP 128 Plus • Web Pages 171