Virtual Return Delay Block; Virtual Return Pre-Mixer Gain Block; Expansion And At Inputs; Renaming An Expansion Or At Input - Extron electronics DMP 128 Plus User Manual

12x8 prodsp digital matrix processor
Hide thumbs Also See for DMP 128 Plus:
Table of Contents

Advertisement

Virtual Return Delay Block

One delay block is available for each virtual return channel. This block functions the same
as the mic/line input delay block (see
configuring the virtual return delay block).

Virtual Return Pre-Mixer Gain Block

The virtual return pre-mixer gain block functions the same as the mic/line input pre-mixer
gain block (see
the virtual return pre-mixer gain block).

Expansion and AT Inputs

The expansion inputs receive signal via the rear panel EXP port when connected with
another EXP enabled device. AT inputs receive signal from the Dante network when
connected to an audio network (AT models only). The DMP 128 Plus can receive 16
channels of audio via the EXP port and 48 channels of audio via Dante (AT models only).
On a DMP 128 Plus AT model, AT inputs 33 through 48 can be used for the EXP inputs
allowing use of the Dante network and the EXP port simultaneously (see
page 93).

Renaming an Expansion or AT Input

NOTES:
1.
2.
3.
Input Pre-Mixer Gain Block
Renaming an AT input in DSP Configurator affects the receiver name in
Dante Controller. Alternatively, renaming a receiver channel name in Dante Controller
affects the name displayed in DSP Configurator (see
Transmitter
on page 113).
AT inputs only appear on DMP 128 Plus AT models.
Click the expansion or AT input name field.
Figure 88.
Expansion Input Name Field
Delete or highlight the text and type the desired name.
Figure 89.
New Expansion Input Name
Press the
key or navigate away from the field to confirm and apply the new
<Enter>
name. Press the
<Down Arrow>
Figure 90.
Renamed Expansion
NOTE: Follow the same procedure to edit an Expansion Input name.
Input Delay Block
on page 37 for information on
on page 42 for information on configuring
Renaming a Receiver or
key to navigate to and highlight the next name field.
DMP 128 Plus • DSP Configurator Software
Expansion Bus
on
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmp 128 plus cDmp 128 plus c v atDmp 128 plus c vDmp 128 plus c at

Table of Contents