Restarting Dante Controller - Extron electronics AXI 22 AT User Manual

Be certain the correct LAN connection is selected (the PC LAN port that is physically
connected to the Dante network) and note the IP address.
Figure 28.
2. If it is on, turn off the PC wireless adapter. Disable all connections except the LAN
port connected to the Dante network (verify this is the correct port by checking the IP
address shown in step 1).
3. Turn off all anti-virus and firewall software on the computer.
4. Enable DHCP on the remaining network connection. This forces the computer to
acquire an IP address from the Dante network.

Restarting Dante Controller

If subscriptions or normal operation cannot be restored, restart Dante Controller software
(see the Dante Controller Help file for the procedure). To access the Dante Controller Help
file, do any of the following:
• Click the Help icon in the upper-right corner of the Dante screen (see figure 29,
Select Contents from the Help menu (
•
Press the <Shift+F1> keys on the computer keyboard.
•
Figure 29.
Configure Dante Interfaces Dialog Box
Accessing the Dante Help File
) on the Dante screen.
2
AXI 22 AT and AXI 44 AT • Dante Controller
).
1
29