Be certain the correct LAN connection is selected (the PC LAN port that is physically
connected to the AT network) and note the IP address.
Figure 136.
2.
If it is on, turn off the PC wireless adapter. Disable all connections except the LAN
port connected to the Dante network (verify this is the correct port by checking the IP
address shown in the
3.
Turn off all anti-virus and firewall software on the computer.
4.
Enable DHCP on the remaining network connection. This forces the computer to
acquire an IP address from the Dante interface.
NOTE: A DHCP server must be on the network for DHCP to function correctly.
Restarting Dante Controller
If subscriptions or normal operation cannot be restored, restart Dante Controller software.
To access the Dante Controller Help file, do any of the following:
•
Click the
figure 137,
Select
•
•
Press the <
help.
Figure 137.
Configure Dante Interfaces Dialog Box
Configure Dante Interfaces
icon in the upper-right corner of the
Help
).
1
, then
or
Help
Online Help
Offline Help
> key on the computer keyboard for online help or <
F1
Accessing the Dante Help File
dialog).
screen (see
Network View
from the menu (
).
2
> for offline
Shift+F1
XMP 240 C AT • Dante Controller
102