Extron electronics DMP 128 Plus User Manual page 49

Once the automix processor is inserted into the
open the dialog box.
Automix
Figure 69. Automix Dialog Box
Automix Channel Name — This name changes to match the default or user defined
1
input name.
AM Group Assignment Panel — Provides nine radio buttons to assign the current
2
automix processor to an AM (automix) group. The default is
automixer unassigned.
Show AM Group Details Button — Opens the
3
button for more information regarding
Automix Help
Automix Parameters — Provides configuration controls for all automix parameters.
4
dBFS Meter — Displays the post-automix signal level.
5
Gate Status Indicator — This LED lights when monitoring is enabled and the gate is
6
open.
Monitor Gate Checkbox — Click the
7
responses regarding gate status (see
Set Defaults Button — Resets all automix parameters to their default settings.
8
Bypass Button — Bypasses the automix processor. When the button is red, bypass is
9
enabled.
OK Button — Confirms changes made to the contained parameters and closes the
¢
dialog box.
Automix
Cancel Button — Reverts any changes made to the contained parameters back to
£
their states when the
Automix
Automix Help Button — Opens the
¤
for further assistance in configuring the automix processor.
block, double-click the block to
Automix
Automix Channel Name
1
AM Group Assignment Panel
2
Show AM Group Details Button
3
Automix Parameters
4
dBFS Meter
5
Gate Status Indicator
6
Monitor Gate Checkbox
7
Set Defaults Button
8
Bypass Button
9
OK Button
¢
Cancel Button
£
Automix Help Button
¤
Automix Groups
Automix Groups
checkbox to enable SIS
Monitor Gate
Automixer Gate Monitoring
dialog box was opened and closes the dialog box.
topic of the DSP Configurator Help file
Automix
DMP 128 Plus • DSP Configurator Software
and leaves the
None
dialog box (click the
).
on the next page).
41