Extron electronics DMP 128 Plus User Manual page 177

Network Page
The page has drop-down ribbons and tabs that are used to configure VoIP
Network
network settings. There are four tabs available for VoIP configuration.
• Interface
QoS/LLDP-MED on the next page
•
Interface
VoIP Interface
1
LAN 1 Configuration
2
LAN 2 Configuration
3
Figure 205. VoIP Network Interface Page
VoIP Interface — Select the desired
1
Options are ,
LAN 1 LAN 2
NOTE: Only select
VLAN
or must be selected within the
LAN 2
tag and select
DHCP
LAN 1 Configuration — Select
2
configuration.
LAN 2 Configuration — Select
3
configuration.
VLAN Configuration — This ribbon is only available when
4
drop-down. Use the fields to enter a VLAN IP configuration.
VoIP Interface
Apply Button — Click the
5
• Transport
NAT Traversal
•
VLAN Configuration
4
Apply Button
5
port to be used for VoIP network traffic.
LAN/VoIP
, and .
VLAN
when joining a tagged network port on the switch.
ribbon. Enter an appropriate VLAN ID
VLAN
or IP configuration.
Static
, or select
DHCP Static
, or select
DHCP Static
button to commit interface changes to the device.
Apply
on page 171
on page 173
LAN 1
and enter a valid IP
and enter a valid IP
is selected from the
VLAN
DMP 128 Plus • Web Pages 169