Line Pages
Click a
tab to access configuration options for that line. Within each line, there are
Line
three pages used for configuration.
Registration Page
Figure 209.
VoIP Line Registration Page
To register a SIP account:
1.
In the
field (see
Extension
was assigned in the call server registration.
NOTE: "Line Extension" is referred to as "User ID" by some call servers.
2.
In the
Display Name (Optional)
internally as the caller ID for the line (optional).
3.
In the
field (
3
Password
NOTE: If a password is not required by the call server, leave this field blank.
4.
In the
Primary Proxy Name/IP
name.
5.
In the
Primary Proxy Port
NOTE: If a port number is not entered,
6.
Click
(
) to commit the changes to the DMP 128 Plus. Committing the changes
6
Apply
does not initiate line registration with the call server.
7.
Click
(
) to initiate registration with the call server. Registration is confirmed
Register
7
in the
field next to the
Status
NOTE: If registration is unsuccessful, refer to the logs page (see
page 177) and contact the VoIP system administrator.
To unregister a line from the call server, click
Advanced Options
The
ribbon (
) at the bottom of the page allows a secondary proxy to be
9
Advanced
specified for redundancy purposes.
figure
209,
above), enter the extension number that
1
field (
), enter a display name that will appear
2
), enter the call server registration password.
field (
), enter the call server IP address or domain
4
field (
), enter the SIP traffic port number.
5
is used be default.
5060
button.
Register
Unregister
Logs Page
on
(
).
8
DMP 128 Plus • Web Pages
174
Need help?
Do you have a question about the DMP 128 Plus and is the answer not in the manual?
Questions and answers