Action-Follow Selector; Selector-Vol/Mute (Selector); Button Labels; Configuration Examples - Extron electronics DMP 128 Plus User Manual

Action-Follow Selector

A button configured with the Action-Follow Selector control type performs an action that is
tied to a volume group or a mute group, but is dependent on a Selector-Vol/Mute button to
define which group the button affects. The table below shows the drop-down list selections
that are available when
Action
Group Mute On
Group Mute Off
Group Mute Toggle
Group Volume Down
Group Volume Up
Group Vol Rotary (ACP 100 only)
Figure 165.

Selector-Vol/Mute (Selector)

Buttons configured as a Selector-Vol/Mute define a gain or mute group. A Selector-Vol/Mute
button acts as a modifier for Action-Follow Selector buttons or controls. For example, if an
Action-Follow Selector button is configured to increase or decrease the volume of a group,
a Selector button defines which gain group is affected by the volume increase or decrease.
Two or more Selector buttons are necessary for Action-Follow Selector buttons to function
properly.

Button Labels

Each button can be labeled to match the control type or function assigned to the button. In
the
in identifying the function of each button.

Configuration Examples

ACP panels can be configured to meet a wide variety of control needs. The following
configuration procedures are examples of flexible configurations using the default buttons
that ship with the ACP panels. The two configuration examples are covered:
•
•
Create the following gain and mute groups from the
Configuring Groups
•
•
•
•
Action-Follow Selector
Action-Follow Selector Selection Table
text field on the right side of the
Label
ACP 100 Configuration Example
ACP 106 Style Configuration Example
on page 70).
Mute and Gain groups for all microphone channels.
Mute and Gain groups for all program channels.
Mute and Gain groups for each individual program source.
Mute group for all output attenuation blocks.
is chosen as the control type.
dialog box, type a name to aid
Configure ACPs
Configure Groups
DMP 128 Plus • Audio Control Panels
dialog box (see
100