To arrange devices into a folder:
1.
2.
3.
4.
Connect to or Disconnect from Device
When DSP Configurator is in Emulate mode, this selection in the
Connect to Device
When DSP Configurator is in Live mode and connected to a device, this selection reads
Disconnect from Device
when selected, and returns to Emulate mode.
For detailed instructions on connecting to a DMP 128 Plus see
Plus in Live Mode
DMP 128 Plus see
Firmware Loader
Select
DSP Configurator. Firmware Loader assists users in updating firmware or uploading new
firmware to devices via RS-232, USB, or TCP/IP connection. Refer to the Firmware Loader
Help file for more information in using the Firmware Loader software.
NOTES:
From the
Device Manager
below).
Enter a name for the folder. The text for the folder name is automatically highlighted and
ready to be edited (
).
2
NOTE: Folders can be renamed later by clicking twice on the folder name and
editing the text.
Press
.
<Enter>
Click and drag devices over the folder name and release to insert the devices into a
folder (
).
3
Figure 145.
Arranging Devices Into a Folder
and opens the
and disconnects DSP Configurator from the current device
on page 18. For detailed instructions on disconnecting from a
Exit Live Mode and Enter Emulate Mode
Tools > Firmware Loader
•
Extron Firmware Loader software must be installed on the host PC in order for it to
be opened.
•
TCP/IP connection is recommended for updating firmware.
dialog box, click the
New Folder
Connect to device...
to open the Extron Firmware Loader software from
DMP 128 Plus • Configuration Tools
button (see figure 145,
1
menu reads
Tools
dialog box when selected.
Connect to a DMP 128
on page 20.
83