Expansion Outputs; Naming An Expansion Output - Extron electronics DMP 128 Plus User Manual

Once an output has been selected, double-click the Aux output gain block again to open
the
(see
dialog box).

Expansion Outputs

Sixteen outputs are available in the
DSP processing capabilities and route audio to the rear panel EXP port when another EXP
device is connected. These channels can also be transmitted to the Dante network on
DMP 128 Plus AT models.
Figure 113.

Naming an Expansion Output

1.
2.
3.
dialog box. This dialog box functions the same as the Aux input gain block
Aux Output
Aux Input Gain Block
on page 44 for information on configuring the
Expansion Outputs Panel
Click the expansion output name field.
Figure 114. Expansion Output Name Field
Delete the text and type the desired expansion output name.
Figure 115. New Expansion Output Name
Press the key or navigate away from the field to confirm and apply the new
<Enter>
output name. Press the
<Down Arrow>
Figure 116. Renamed Expansion Output
NOTE: Follow the same procedure to edit an Expansion output name.
panel. These outputs contain
Expansion Outputs
to navigate to and highlight the next name field.
DMP 128 Plus • DSP Configurator Software
Aux Output
64