Menu Bar; File - Extron electronics DMP 128 Plus User Manual

Menu Bar

File

Figure 16.
1
2
3
4
5
6
7
8
File Menu
New — Opens a new configuration file. This option is only available in Emulate mode
(see Emulate Mode on page 18). If the current configuration has not been saved,
the dialog box opens and asks to save the current configuration before a new
Save
configuration is opened. Click
the current configuration and open the new configuration. Click
current configuration.
Open — Opens an existing configuration or template file. When selected, the
dialog box opens to search for saved configuration or template files. Double-click a
configuration or template file to load it.
NOTE: Configuration files have a
file extension.
.EDCT
Save — Saves the current configuration to a configuration file. If this is the first time the
configuration is being saved, the
a name and save location for the configuration file.
It is best to create and save configuration files while in Emulate mode.
TIP:
Save As — Saves the current configuration file under a new name and location or as a
template file. When selected, the
Export Single Device — Saves the currently selected device in Device Manager as
a configuration file. This function is used to save an individual device when there are
multiple devices listed in the Device Manager (see
Backup — Recalls and transfers all partial presets of a DMP 128 to a DSP Configurator
or template file within DSP Configurator.
NOTE: This is only necessary if a DMP 128 (non-Plus) is included in the
configuration file via Device Manager.
Recent Files — Lists the five most recently opened configuration files. These files can
be selected and loaded into DSP Configurator.
Exit — Closes DSP Configurator. If the current configuration has not been saved, the
dialog box opens and prompts the user to save the current configuration before
Save
closing the software. Click
saving. Click to return to the main workspace and keep the software running.
Cancel
to save the current configuration. Click
Yes
file extension and template files have a
.EDC
Save Configuration As...
Save Configuration As...
Device Manager
to save the file. Click
Yes No
DMP 128 Plus • DSP Configurator Software
to delete
No
to return to the
Cancel
Browse
dialog box opens. Enter
dialog box opens.
on page 81).
to exit the application without
13