Extron electronics DMP 128 Plus User Manual page 82
12x8 prodsp digital
matrix processor
Hide thumbs
Also See for DMP 128 Plus:
- Setup manual (4 pages) ,
- Setup manual (4 pages) ,
- User manual (95 pages)
Table of Contents
Advertisement
4.
From the
Digital Out 1 Acting upon
macro affected by the mode.
Figure 133.
Selecting Digital Out 1 Acting Upon
5.
From the
Digital Out 2
drop-down.
6.
From the
Digital Out 2 Acting upon
macro affected by the mode.
7.
Repeat steps 1 through 6 for additional Digital I/O configurations.
8.
Click
to close the
Close
9.
To save the Digital I/O configuration, click
location to save the configuration file.
To push the Digital I/O configuration to a DMP 128 Plus:
1.
Connect to a DMP 128 Plus in Live mode (see
page 18) and follow the Digital I/O configurations steps listed starting on page 73.
Changes made in the
Configure Digital I/O
applied directly to the DMP 128 Plus.
-or-
1.
Follow the Digital I/O configuration steps listed starting on
mode.
2.
Connect to a DMP 128 Plus in Live mode and perform a configuration file push (see
Live and Emulate Panel
drop-down, select an input, group, preset, or
panel, select a mode for the digital output from the
drop-down, select the input, group, preset, or
Configure Digital I/O
File > Save
Live and Emulate Panel
dialog box when connected Live are
on page 18).
DMP 128 Plus • Configuration Tools
Mode
dialog box.
or press
and choose a
<Ctrl+S>
on
page 73
while in Emulate
74
Advertisement
Table of Contents
