Extron electronics DMP 128 Plus User Manual page 178

QoS/LLDP-MED
QoS Configuration
1
LLDP-MED Configuration
2
Figure 206. VoIP Network QoS/LLDP-MED Page
QoS Configuration
1
1. Use the
QoS Layer 2
decimal value for layer 2 network frames. The default selection is
.
Applications
2. Use the
QoS Layer 3 (SIP)
Services Code Point) decimal value for layer 3 SIP network packets. The default
selection is
24 - Call Signaling
3. Use the
QoS Layer 3 (RTP)
Services Code Point) decimal value for layer 3 RTP network packets. The default
selection is
46 - Voice
NOTE: Consult the VoIP system administrator before changing any QoS values.
LLDP-MED Configuration
2
1. Select or
Enable Disable
Media Endpoint Discovery).
2. Select the
VLAN ID
automatically configure the DMP 128 Plus VLAN tag (VLAN must be selected as the
interface for this feature to work).
3.
Select the
Qos PCP
automatically configure layer 2 QoS.
Apply Button
3
drop-down to specify the PCP (Priority Code Point)
drop-down to specify the DSCP (Differentiated
.
drop-down to specify the DSCP (Differentiated
.
(default) for LLDP-MED (Link Layer Discovery Protocol -
checkbox to read the voice VLAN ID from the network and
checkbox to read PCP values from the network and
3 - Critical
DMP 128 Plus • Web Pages 170