Outputs; Naming An Output - Extron electronics DMP 128 Plus User Manual

Outputs

Eight outputs are available in the
level analog outputs. Signal routed to these outputs can also be transmitted onto the Dante
network on DMP 128 Plus AT models.
Figure 95.

Naming an Output

1.
2.
3.
Outputs Panel
Click the output name field.
Figure 96. Output Name Field
Delete the text and type the desired output name.
Figure 97. New Output Name
Press the key or navigate away from the field to confirm and apply the new
<Enter>
output name. Press the
<Down Arrow>
field.
Figure 98. Renamed Output
NOTE: Follow the same procedure to edit an Output name.
panel and route signal to the eight rear panel line
Outputs
key to navigate to and highlight the next name
DMP 128 Plus • DSP Configurator Software 58