Extron electronics DMP 128 Plus C V Configuration Manual
  1. Manuals
  2. Brands
  3. Extron electronics Manuals
  4. Mixer
  5. DMP 128 Plus C
  6. Configuration manual
Extron electronics DMP 128 Plus C V Configuration Manual

Extron electronics DMP 128 Plus C V Configuration Manual

Ringcentral configuration guide digital matrix processors
Hide thumbs Also See for DMP 128 Plus C V:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
DMP 128 Plus C V
DMP 128 Plus C V AT
RingCentral Configuration Guide
REVISION:
1.0
DATE:
JUNE 26
TH
2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DMP 128 Plus C V and is the answer not in the manual?

Questions and answers

Related Manuals for Extron electronics DMP 128 Plus C V

Summary of Contents for Extron electronics DMP 128 Plus C V

  • Page 1 DMP 128 Plus C V DMP 128 Plus C V AT RingCentral Configuration Guide REVISION: DATE: JUNE 26 2018...
  • Page 2 Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral Revision Log Date Version Notes June 26 2018 First Release: Applies to Firmware 1.01.0010 Page 2 of 14...

  • Page 3: Table Of Contents

    DMP 128 Plus C V / C V AT – RingCentral Table of Contents Introduction ......................... 4 Configuring RingCentral for DMP 128 Plus C V (AT) VoIP Registration ....... 4 Configuring DMP 128 Plus C V (AT) VoIP Lines ..............5 Network Interface Configuration ..................5 Transport Configuration ....................

  • Page 4: Introduction

    2.0 Configuring RingCentral for DMP 128 Plus C V (AT) VoIP Registration Prior to proceeding with this guide, contact RingCentral in order to add or purchase SIP extensions for use with the DMP 128 Plus C V (AT). The DMP behaves as a 3 party SIP device.

  • Page 5: Configuring Dmp 128 Plus C V (At) Voip Lines

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 3.0 Configuring DMP 128 Plus C V (AT) VoIP Lines VoIP configuration of the DMP 128 Plus is handled exclusively through a web interface, served from the device itself. The VoIP landing page is accessed through an address of the format - http://192.168.254.254/www/voip.html...

  • Page 6: Transport Configuration

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 3.2 Transport Configuration Click on the Transport tab to access signaling transport configuration. Check that the transport is set to UDP. In the event that changes need to be made, click Apply to commit any adjustments to the device.

  • Page 7: Line Registration

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 3.3 Line Registration Click on the first line tab to be configured as part of the system, e.g. Line 1. Refer to the credentials provided by RingCentral (Section 2.0).

  • Page 8: Outbound Proxy

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 3.4 Outbound Proxy NOTE: The following steps must be carried out in order to set the Outbound Proxy and Port Number required for RingCentral registration. 1. Create a new blank text file using a suitable basic text editor.
  • Page 9 Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 4. Navigate to the DMP VoIP configuration webpage and click on the System tab. 5. Under Export System Configuration, click the Export button to back up the current VoIP configuration to disk.

  • Page 10: Codecs

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 3.5 Codecs The availability and priority of codecs may be changed from within the Audio tab. Codecs will only be available for use within phone calls if they are moved from the Available to the Assigned column.

  • Page 11: Dialing

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 3.6 Dialing Use the Dialing tab to select the desired DTMF signaling method. The default DMP 128 mode is In-Band. Other available options are as follows: •...

  • Page 12: System Overview

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 3.7 System Overview Once all required lines have been registered to RingCentral, use the Home tab to view a summary of the system, as required. In the example below, one of two registered lines (line 3) is currently in an active call.

  • Page 13: Appendix A: Rtp Port Range

    Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral Appendix A: RTP Port Range The default port range for VoIP RTP traffic on the DMP is 50000 – 50999. To change this range, the following steps must be carried out.
  • Page 14 Revision Date: 06/26/18 DMP 128 Plus C V / C V AT – RingCentral 4. Navigate to the DMP VoIP configuration webpage and click on the System tab. 5. Under Export System Configuration, click the Export button to back up the current VoIP configuration to disk.

This manual is also suitable for:

Dmp 128 plus c v at

Table of Contents