Input Automix Block - Extron electronics DMP 128 Plus User Manual

Adaptive Gain
After inserting an adaptive gain processor, double-click the
Adaptive Gain
Figure 67.
Adaptive Gain Source Configuration — In the
1
inputs that will have gain added by the adaptive gain processor. In the
column, enter the maximum amount of gain that will be applied to each channel
(dB)
selected in the
channel when signal exceeds the threshold on the adaptive gain trigger channel.
NOTE: For every 1 dB of signal beyond the level set in the
of gain will be added to the channels selected in the
occurs until the maximum gain set in the
Adaptive Gain Parameter Settings — Contains controls for
2
,
Time
Adaptive Gain Operation Help Button — Opens the
3
topic of the DSP Configurator Help file for further assistance in adaptive gain
configuration.

Input Automix Block

Double-click the
the automix processor into the block.
Figure 68.
dialog box.
Adaptive Gain Dialog Box
column. When a box is checked, gain is applied to that
Add Gain To
, and
Hold Time Release Time
block to open a drop-down menu. Select
Automix
Automix Block and Drop-Down
icon to open the
AG
Adaptive Gain Source Configuration
1
Adaptive Gain Parameter Settings
2
Adaptive Gain Operation Help Button
3
column, check the
Add Gain To
Threshold
Add Gain To
field has been applied.
Max Gain (dB)
Threshold
.
Adaptive Gain Operation
Auto-mixer
DMP 128 Plus • DSP Configurator Software
Max Gain
field, 1 dB
column. This
,
Attack
to insert
40