Finding A Dante Device Ip Address - Extron electronics AXI 22 AT User Manual

7. Repeat steps 4 through 6 to rename additional Transmitter channels.
When finished renaming Transmitters, close the Device View dialog box.
8.
Figure 23.

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
the AXI 22 AT or AXI 44 AT in Dante Controller
NOTE: If the AXI has not been renamed, its default name consists of the product name
followed by a hyphen, plus the last 6 characters of the Dante device MAC address (for
example, AXI44-0a690b).
1. Open Dante Controller.
On the Dante Controller-Network View screen, click the Device Info tab (see
2.
figure 24,
On the Device Info page, locate the name of the AXI device in the Device Name
3.
column (
example below, the IP address for the connected AXI 44 AT is 192.168.11.181.
Figure 24.
Renaming a Transmitter
).
1
). The IP address is located in the Primary Address column (
2
Device Info Page
on page 20).
AXI 22 AT and AXI 44 AT • Dante Controller
Renaming
). In the
3
24