Finding A Dante Device Ip Address - Extron electronics AXI 22 AT User Manual

To rename an AXI Transmitter:
1. From the
<Ctrl+D>
2. From the
desired AXI device (see figure 30,
3. On the
4. Click the
text field with a cursor (
5. Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for
6.
Press
7. Repeat steps 4 through 6 to rename additional Transmitter channels.
8. When finished renaming Transmitters, close the
Figure 30.

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
the AXI 22 AT or AXI 44 AT in Dante Controller
NOTE: If the AXI has not been renamed, its default name consists of the product name
followed by a hyphen, plus the last 6 characters of the Dante device MAC address (for
example,
1. Open Dante Controller.
2. On the
figure 31,
3. On the
column (
example below, the IP address for the connected AXI 44 AT is
Figure 31.
menu on the
Device Network View
on the keyboard. The
Device View
(Select a Dante Device...)
screen, select the
Device View
field of the Transmitter to be renamed. The area becomes a
Channel Label
).
3
on the keyboard or click another label field to confirm the new name.
<Enter>
Renaming a Transmitter
).
AXI44-0a690b
Dante Controller-Network View
).
1
page, locate the name of the AXI device in the
Device Info
). The IP address is located in the
2
Device Info Page
screen, select
dialog box opens.
drop-down menu, select the name of the
)
1
tab ( ).
Transmit 2
, , and (period).
@ = .
Device View
on page 23).
screen, click the
Primary Address
AXI 22 AT and AXI 44 AT • Dante Controller
, or press
Device View
dialog box.
Renaming
tab (see
Device Info
Device Name
column ( ). In the
3
.
192.168.11.181
27