Comtech EF Data CDM-570 Installation And Operation Manual page 256

CDM-570/570L Satellite Modem with Optional IP Module
IP Module CLI and Telnet Operation
Menu Options/Fields
Delete Route
Display
PerRoute
Downlink Mcast
Save Parameters
Exit
Selecting Per Route will display the following menu:
Header Compression, Payload Compression or 3xDES Encryption can be configured on a
per Route basis by selecting the route number.
Entry
different routes per screen. To allow editing on any of the 256
entries that can be defined, the user can select a base
address to control which 8 routes are displayed. For
example, if the user wants to edit Routes 32-40, then a Base
value of 32 should be defined.
D Route Name to delete.
P Displays all of the routes that are currently defined in the
system. This will include automatically generated routes that
are provided to simplify provisioning of the system. The
information displayed is: Route Name, DestIP/SnetBits, Next
Hop, HDLC, and Flags.
Enter to enable Header Compression, Payload Compression
E
or 3xDES Encryption on a Per Route basis.
Read Read only status of Downlink Multicast (Enabled or
Disabled). This feature is enabled or disabled on the
Only
Administrator Feature page.
This option allows a user to save the current configuration to
S
permanent storage. This configuration will be restored on
each successive power cycle.
X This option allows a user to exit the current menu and return
to its parent menu.
17–34
MN/CDM570L.IOM
Description
Revision 3