Chapter 14. Ethernet Management (Base Modem); Introduction; Ethernet Management Interface Protocols - Comtech EF Data CDM-570 Installation And Operation Manual

14.1

Introduction

The base modem is equipped with an RJ-45, 10/100 BaseT Ethernet management interface used for
monitor and control purposes.
Note that the optional IP module does NOT need to be installed.
This chapter of the manual will provide a high-level overview of the functionality provided by this
interface and references other chapters for further details.
14.2

Ethernet Management Interface Protocols

The modem 10/100BaseT Ethernet Management Interface supports three (3) different management
protocols:
• Web Server interface for complete product management
• SNMP with public and private MIB
• Telnet interface for remote product M&C
In general, the operation of each of these interfaces is essentially identical to the management interfaces
that are available when the optional IP module is installed.
Chapter 14. ETHERNET
14–1
MANAGEMENT
(Base Modem)