Menu Trees - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570 Satellite Modem with Optional IP Module
The keypad has an auto-repeat feature. If a key is held down for more than 1 second, the
key action will repeat, automatically, at the rate of 15 keystrokes per second. This is
particularly useful when editing numeric fields, with many digits, such as frequency or data
rate.
IMPORTANT

MENU TREES

F.2
F.2.1 MODEM MAIN MENU
The user is presented with the following choices:
SELECT: Config Test Info
Monitor Save/Ld Util ODU
Config
Monitor
Test
Info
Save/Ld
Util
ODU
The ODU menu item is described in this section, in detail.
(Configuration) This menu branch permits the user to fully configure
the unit.
This menu branch permits the user to monitor the alarm status of the
unit, to view the log of stored events, and to display the Receive
Parameters screen.
This menu branch permits the user to invoke one of several test
modes (loopbacks, for example).
(Information) This menu branch permits the user to view information
on the unit, without having to go into configuration screens.
(Save/Load) This menu branch permits the user to save and to
retrieve up to 10 different modem configurations.
(Utility) This menu branch permits the user to perform miscellaneous
functions, such as setting the Real-time clock, adjusting the display
brightness, etc.
(Outdoor Unit). This permits the user to monitor and control a
Comtech EF Data RF Transceiver (CSAT or KST-2000A/B), if
connected.
Addendum B- 2
ODU Operation