Comtech EF Data CDM-570 Installation And Operation Manual page 228

CDM-570/570L Satellite Modem with Optional IP Module
IP Module CLI and Telnet Operation
Menu Options/Fields
3xDES Configuration
SMTP Configuration
SNMP Configuration
Working Mode
WAN TX Framing Mode
easyConnect Multicast
Option
Header comp refresh rate
(in pkts) for UDP/RTP1
Header comp refresh rate
(in pkts) for UDP
Header comp refresh rate
(in pkts) for all others
Payload comp refresh rate
(in pkts)
Telnet Timeout
Save Parameters
Exit
Entry
D The 3xDES Configuration Page allows the user to
determine if 3xDES encryption is enabled on a device
and if so, the 3xDES keys that are used to decrypt
traffic. The keys specified for the transmit function are
completely independent for the 3xDES keys specified
for the receiver function.
M The SMTP configuration page allows the user to
specify appropriate settings for SMTP email server.
N The SNMP configuration page allows the user to
specify management parameters for SNMP.
C
Used to set the Working Mode easyConnect or
Router. See Chapter 15 for additional information.
W Comtech Native – CEFD Proprietary Framing
SMR5000 Compatibility – only used if unit is integrated
into a Vipersat network with existing SMR5000's
E
When unit is running in easyConnect mode, multicast
is only forwarded across link if both units have this
feature enabled.
R This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
U This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
O This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
Q This setting allows for the adjustment of how often to
send a full payload when Payload Compression is
enabled.
The Telnet timeout determines how many minutes (1-
T
60) of Telnet inactivity before the Telnet session is
automatically terminated.
S This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
X This option allows a user to exit the current menu and
return to its parent menu.
17–6
MN/CDM570L.IOM
Description
Revision 3