Comtech EF Data CDM-570 Installation And Operation Manual page 231

CDM-570/570L Satellite Modem with Optional IP Module
IP Module CLI and Telnet Operation
The Access Lists page contains the following options/fields:
Menu Options/Fields
AccessClient1 - 4
Access List
Enforcement
Save Parameters
Exit
Entry
1 - 4 The Access Client list allows a user to define which remote
clients can connect when the Access List Enforcement is
enabled. Each entry allows a user to specify an IP Address
or a subnet mask to define a unique class of machines that
are allowed access.
For example, if a user wanted to grant access to a PC with
an IP Address of 10.10.10.1 and any PC on a subnet of
192.168.10.xxx, then the Access List would be defined as:
AccessClient1 ...[10.10.10.1/32]
AccessClient2.... [192.168.10.0/24]
E The Access List Enforcement allows a user to grant access
via ping, telnet, HTTP, FTP, and SNMP to a well-defined list
of client machines.
Access List Enforcement toggles between [Enabled] and
[Disabled]. If disabled, then any client machine will be able
to connect via ping, telnet, HTTP, FTP, and SNMP.
If enabled, then only those machines specified in the Access
Client List will be allowed to connect via ping, telnet, HTTP, and
SNMP.
S This option allows a user to save the current configuration to
permanent storage. This configuration will be restored on
each successive power cycle.
X This option allows a user to exit the current menu and return
to its parent menu.
17–9
MN/CDM570L.IOM
Description
Revision 3