Comtech EF Data CDM-570 Installation And Operation Manual page 274

CDM-570/570L Satellite Modem with Optional IP Module
IP Module CLI and Telnet Operation
17.2.8.1 Unit Information Page
The Unit Information page is activated by entering "I" from the Operations and
Maintenance page.
The Unit Information page contains the following informatiom:
Current System time
Image # that the
currently booted from
PARAM file that the
currently configured from
Currently Loaded
Boot
Bulk #1
Bulk #2
FPGA TX1
FPGA RX1
FPGA TX2
FPGA RX2
IP M
odule is
IP M
odule is
IP M
odule SW
DAY MONTH DATE hh:mm:ss YEAR
By default will be the Latest, unless "Boot From" is set
to Image #1 or Image #2
Will be PARAM file from Flash or Factory Default
If no parameter file is found in flash memory.
Will display Build Date, CEFD FW#, Revision #, and
IP M
size of each odule SW file.
There will be a single Boot SW file.
The Bulk file contains all of the SW files for the
M
odule and there are two slots available.
The FPGA TX/RX files are subsets of the Bulk SW.
17–52
Revision 3
MN/CDM570L.IOM
IP