Comtech EF Data CDM-570 Installation And Operation Manual page 260

70/140mhz, l-band,
Hide thumbs Also See for CDM-570:
Table of Contents

Advertisement

CDM-570/570L Satellite Modem with Optional IP Module
IP Module CLI and Telnet Operation
Menu Options/Fields
CDM-IP as Server:
Number of missed
responses before leaving
IGMP group
CDM-IP as Client:
Recognized IGMP queries
Entry
M
Defines the number of membership queries that go
unanswered from LAN clients before the Ethernet
Interface will no longer forward data for that IGMP
group.
IP M
Consider a
set to 60 seconds and the number of missed
responses set to 3. If a client joins an IGMP group,
then the service to that group will not be discontinued
until no clients respond to a query from the
for a period of 60*3 = 180 seconds.
C
The Recognize IGMP Queries parameters determines
IP M
if the
odule should respond to periodic queries
from an IGMP server that publishes a request to join a
specified multicast group. This parameter can assume
one of (2) values:
1.
YES
2.
NO
If set to YES, the
query by requesting to join a Multicast Group published
by the server that is defined in the
table.
If set to NO, the
queries from a server. In this type of configuration, the
IP M
odule may be configured to unconditionally
request to join an IGMP group at an interval specified
by the "Unsolicited Report Interval" option in the
Transmitter IGMP Client Configuration Page.
17–38
Description
odule that has the IGMP query period
IP M
odule will respond to an IGMP
IP M
IP M
odule will not respond to IGMP
Revision 3
MN/CDM570L.IOM
IP M
odule
odule's route

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdm-570l

Table of Contents