Comtech EF Data CDM-570 Installation And Operation Manual page 371

CDM-570 Satellite Modem with Optional IP Module
If Manual mode is selected, the user is prompted to edit the transmit slope setting. This
is accomplished using the
F.2.3.23 (ODU,ENABLE,1:1,CSAT#1,CONFIG)
(ODU,ENABLE,1:1,CSAT#2,CONFIG)
(ODU,ENABLE,STAND-ALONE,CONFIG) MISCELLANEOUS
MISC: Cold-Start AFR LNA
XRef Ref-Adjust RTC (
This menu item is used to select miscellaneous ODU parameters for modification. Use
the ◄ ► arrow keys, then press ENT.
F.2.3.24 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS)
COLD-START
(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS)
COLD-START
(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS)
COLD-START
Cold-Start State:
Enabled
The user is prompted to select either ENABLED or DISABLED, using the ◄ ► arrow
keys, then to press ENT.
F.2.3.25 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS)
AFR(Auto Flt Rec)
(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS)
AFR(Auto Flt Rec)
(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS)
AFR(Auto Flt Rec)
Auto Fault Recovery:
Enabled
The user is prompted to select either ENABLED or DISABLED, using the ◄ ► arrow
keys, then to press ENT.
▲ ▼
arrow keys. The user then presses ENT.
◄ ►)
◄ ►
Disabled ( )
◄ ►
Disabled ( )
Addendum B- 9
ODU Operation
MISCELLANEOUS
MISCELLANEOUS