Comtech EF Data CDM-570 Installation And Operation Manual page 184

CDM-570/570L Satellite Modem with Optional IP Module
Serial Remote Control
Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Rx BER N/A 5 bytes
Redundancy N/A 1 byte, value
State of 0 or 1
Local/Remote LRS= 1 byte, value
Status of 0 or 1
Software N/A 34-37 bytes
Revision
Description of Arguments
to Query
Query only.
Unit returns the value of the estimated corrected BER in the form
-c
a.b x 10 . First three bytes are the value. Last two bytes are the
exponent. Returns 99999 if the demodulator is unlocked.
Example: BER=4.8E3 (which is BER = 4.8 x 10
Query only.
Unit returns the redundancy state of the unit, where
0=Offline
1=Online
Example: RED=1 (which is Online)
Command or Query.
Local/Remote status, where:
0=Local
1=Serial Remote
3 = Ethernet Remote
Example: LRS=1 (which is Serial Remote)
Query only.
Unit returns the value of the internal software revision installed in
the unit, in the form :
Boot:x.y.z Bulk1:x.y.z Bulk2:x.y.z
Or
Boot:x.y.zz Bulk1:x.y.zz Bulk2:x.y.zz
Response to
Command
N/A
-3
)
N/A
LRS=
LRS?
LRS*
LRS#
N/A
13–22
Revision 3
MN/CDM570L.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
BER? BER=a.bEc
(see description
of arguments)
RED? RED=x
(see description
of arguments)
LRS? LRS=x
(see description of
arguments)
SWR? SWR=Boot:x.y.zz
Bulk1:x.y.zz
Bulk2:x.y.zz
(see description
of arguments)