CDM-570/570L Satellite Modem with Optional IP Module
SNMP Interface
19.5.3
ICMP Group
This group contains the Internet Control Message Protocol (ICMP) input and output
statistics. ICMP messages are used for out-of-band messages related to network
operation. This group is implemented per RFC1213.
19.5.4
TCP Group
This group contains statistics and control parameters for the TCP protocol. This group
contains a table describing the current TCP connections.
Note: The instances of object types that represent information about a particular TCP
connection are transient; they persist only as long as the connection in question.
OID
TcpRtoAlgorithm
TcpRtoMin
TcpRtoMax
TcpMaxConn
TcpActiveOpens
TcpPassiveOpens
TcpAttemptFails
TcpEstabResets
TcpCurrEstab
TcpInSegs
TcpOutSegs
TcpRetransSegs
Table 19-4. TCP Group OIDs
Algorithm used to determine the timeout value used for
retransmitting unacknowledged octets. The CDM-570/570L uses
Van Jacobson's algorithm.
Minimum value permitted by a TCP implementation for the
retransmission timeout. The CDM-570/570L uses a minimum
timeout of 1000 milliseconds.
Maximum value permitted by a TCP implementation for the
retransmission timeout. The CDM-570/570L uses a maximum
timeout of 64000 milliseconds.
Limit on the total number of TCP connections the entity can
support. In the CDM-570/570L , the maximum number of
connections is dynamic so a value of –1 is returned.
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
19–8
MN/CDM570L.IOM
Description
Revision 3