Monitor: Ip Statistics; Select: Info (Information) Menus; Info: All; Info: Id - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation
6.2.3.8

Monitor: IP Statistics

IPstats: Port x
Unicasts:
This screen is identical to and displays the same performance information as the screen shown
in Sect. 6.2.1.13.3 CONFIG: IP  Setup  Stats.

6.2.4 SELECT: Info (Information) Menus

Info: All ID
Drop
The read-only INFO screens display the modem's current configuration information without
risking inadvertent changes.
Use the ◄ ► arrow keys to select All, ID, Mode, Tx, Rx, Clocks, EDMAC, Drop, Insert, Remote,
Alarm-Mask, or Misc, and then press ENTER.
After viewing any Info screen except All: Press ENTER or CLEAR to return to the previous menu.
6.2.4.1

Info: All

All = Start
(Stop, Start)
Use this menu to scroll through and review configuration settings on a sequential basis. The
configuration displays are read-only – no editing is possible.
To view the configurations – Use the
ENTER to continue through all the displays.
To discontinue viewing – Press CLEAR, use the
ENTER.
6.2.4.2

Info: ID

----A TEST MESSAGE TO SHOW CIRCUIT ID---
This screen displays the 40-character, user-defined Circuit ID string that was created using the
Utility Circuit-ID menu. The Circuit ID also appears in the title bar of compatible web browsers
for easy unit identification.
In
00000003
Mode Tx
Insert Remote
arrow keys to select between Stop and Start. Press
▲▼
Modem Circuit ID:
6–78
Out ()
00000023 Clr:N
Rx Clocks EDMAC
Alarm-Mask Misc
()
arrow keys to select Stop, and then press
▲▼
Revision 0
MN-CDM625A