Comtech EF Data CDM-570 Installation And Operation Manual page 316

CDM-570/570L Satellite Modem with Optional IP Module
SNMP Interface
OID
CdmipIpRouteRowStatus
Note: The "cdmipIpRouteHdrComp," "cdmipIpRoutePayloadComp" or "cdmipIpRouteDesKey"
OID will only be accessible if the FAST feature has been purchased and activated.
Otherwise, a get GET will return 1 (clear) and a set SET will return an error.
Description
Used in GET operations to tell if the route
table entry is active. Used in SET operations
to tell if a new route table entry is to be created
or an existing route table entry is to be
deleted.
It returns 1 (active) to indicate that the route
entry is available for use by the managed
device. The values of 2 (notInService) and 3
(notReady) are not supported.
When a new route entry is created, this OID
must be set to 4 (createAndGo). The value of
5 (createAndWait) is not supported.
If an existing row is to be deleted this OID
must be set to 6 (destroy), which indicates that
the user's desire to delete the route from the
route table.
The "cdmipIpRouteRowStatus" can return:
Active
The "cdmipIpRouteRowStatus" can be set to
the following for row create/delete:
Create And Go
Destroy
19–14
MN/CDM570L.IOM
1
4
6
Revision 3