Comtech EF Data CDM-570 Installation And Operation Manual page 394

(CONFIG, REMOTE, ETHERNET SNMP) Traps
If Traps is selected, the following sub-menu is displayed.
Traps: Community Version
IP Addr#1 IP Addr#2 (◄ ►)
i t
If Community is selected, the following sub-menu is displayed.
Trap Community:
comtech
Edit the Trap Community string using the ◄ ► and ▲ ▼ arrow
keys. Only the first 20 characters on the bottom line are available.
The cursor selects the position on the bottom line (◄ ►) and the
character is then edited (▲ ▼). All printable ASCII characters are
available with the exception of backslash (ASCII code 92) and ~
(ASCII code 126). When the user has composed the string, press
ENTER. All trailing spaces are removed from the Community
string upon entering.
If Version is selected, the following sub-menu is displayed.
Trap Version:
SNMPv1
Select SNMPv1 or SNMPv2, using the ◄ ► arrow keys, then
press ENTER.
If IP Addr#1 is selected, the following sub-menu is displayed.
Trap IP #1:
000.000.000.000
If IP Addr#2 is selected, the following sub-menu is displayed.
Trap IP #2:
000.000.000.000
These two IP Addresses are Trap Destination's IP Addresses. Edit
the IP Address by using the ◄ ► and ▲ ▼ arrow keys. If both
Trap IP Address are 000.000.000.000, it means Trap is disabled.
Update for Remote Commands and Front Panel
Ethernet Menus
(◄ ►,▲ ▼)
SNMPv2 (◄ ►,ENT)
(◄ ►,▲ ▼)
(◄ ►,▲ ▼)
9