Comtech EF Data CDM-570 Installation And Operation Manual page 291

CDM-570/570L Satellite Modem with Optional IP Module
IP Module CLI and Telnet Operation
Menu Options/Fields
Dump Packets received
from Ethernet Interface
Dump Packets received by
Router
Dump Packets sent to
EndStation
Dump Packets received
from EndStation
Ping
Traceroute
Command Line Debug
Prompt
Save Parameters
Exit
Entry
V Toggles [Yes] and [No]
Executing this menu option forces the
dump a hexadecimal representation of each packet that
it receives from the Ethernet Interface.
Toggle [Yes] and [No]
B
Executing this menu option forces the
dump a hexadecimal representation of each packet that
is received by the routing engine. (Note: Does not apply
when in easyConnect mode.)
G Toggle [Yes] and [No]
Executing this menu option forces the
dump a hexadecimal representation of each packet that
is received by and destined for this modem. This traffic
would include Pings, SNMP, Telnet, HTTP, and FTP
types of traffic.
H Toggle [Yes] and [No]
Executing this menu option forces the
dump a hexadecimal representation of each packet that
is sourced from this modem and destined for some other
device. This allows a user to see what type of packets
this modem is generating internally.
P Enter the ip address in aaa.bbb.ccc.ddd format
A Enter the ip address in aaa.bbb.ccc.ddd format
D Enter the password to access the debug command line.
Note: This is reserved for Customer Service and
engineering use.
S This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
X This option allows a user to exit the current menu and
return to its parent menu.
17–69
MN/CDM570L.IOM
Description
IP M
odule to
IP M
odule to
IP M
odule to
IP M
odule to
Revision 3