Comtech EF Data CDM-570 Installation And Operation Manual page 385

CDM-570 Satellite Modem with Optional IP Module
F.2.5 (ODU,ENABLE) STATUS
STATUS:PS:OK RF:OK UC:OK
LNA:OK AG:OK HP:OK DC:OK
This menu displays summary information. The operator may select 1 of 6 detailed status
windows. Use the ◄ ► keys, then press ENT.
The cursor may be moved over 6 of the 7 status parameters to view more detailed status
information. These screens are continually updated while being viewed.
AG
DC
HP
LNA
PS
RF
UC
P/Supplies: 7V:OK 17V:OK
REF:WARM 72M:OK RANGE:NA
SRC:INT
UPCONV STATUS: OVRTMP:OK
SSYN:OK
AGC STATUS:
LOOP:OK
HPA: OVERTMP:OK 9.75V:OK
-5V:OK
DNCONV STATUS: OVRTMP:OK
LSYN:OK
= AGC Status
= Down Converter
= HPA Status
= Low Noise Amplifier (No further detail)
= Power Supplies
= Reference
= Up Converter
-7V:OK 12V:OK
XLK:NA PHASE:NA
KSYN:OK PRG:OK
EIP:OK
IIP:OK
BIAS:OK PRG:OK
KSYN:OK PRG:OK
Addendum B- 23
ODU Operation
FT = Fault
NA = Not Applicable
OK = OK – No Fault