Example For Filtering Received And Advertised Routes - Huawei S6700 Series Configuration Manual

Hide thumbs Also See for S6700 Series:

Table of Contents

S6700 Series Ethernet Switches

Configuration Guide - IP Routing

10.10.1 Example for Filtering Received and Advertised Routes

Networking Requirements

Internet and provides some of these routes for Switch-B. Switch-A is required to provide

172.1.17.0/24, 172.1.18.0/24, and 172.1.19.0/24 to Switch-B. Switch-C receives only

172.1.18.0/24 and Switch-D receives all routes provided by Switch-B.

Figure 10-1 Networking diagram for filtering received and advertised routes

Configuration Roadmap

The configuration roadmap is as follows:

Issue 01 (2012-03-15)

10-1, in a network that runs OSPF, Switch-A receives routes from the

Create the ID of the VLAN to which each interface belongs.

Assign an IP address to each VLANIF interface.

Configure basic OSPF functions on Switch-A, Switch-B, Switch-C, and Switch-D.

Configure static routes on Switch-A and import these routes into OSPF.

Configure the policy for advertising routes on Switch-A and check the filtering result on

Configure the policy for receiving routes on Switch-C and check the filtering result on

Huawei Proprietary and Confidential

10 Routing Policy Configuration

172.1.16.0/24

172.1.17.0/24

172.1.18.0/24

172.1.19.0/24

172.1.20.0/24

VLANIF Interface

192.168.1.1/24

192.168.1.2/24

192.168.2.1/24

192.168.3.1/24

192.168.2.2/24

192.168.3.2/24