S6700 Series Ethernet Switches
Configuration Guide - IP Routing
After the command is used, policy filtering is immediately effective. You can run the command
to configure BGP to immediately apply new policies.
The polices affected by the timer are ACLs, IP prefix lists, AS-Path filters, community filters,
extended community filters, RD filters, and Route-Policies.
----End
10.8.3 Checking the Configuration
After the delay for applying a routing policy is configured, you can check the configuration.
Prerequisites
The configurations for controlling the valid time of the routing policy are complete.
Procedure
l
----End
10.9 Maintaining the Routing Policy
Maintaining routing policies involves clearing the statistics of the IP prefix list and debugging
routing policies.
Context
The statistics of IP prefix lists cannot be restored after being cleared. Exercise caution when
running this command.
By default, the statistics of IP prefix lists are not cleared.
Procedure
l
l
----End
10.10 Configuration Examples
This section provides several configuration examples of the routing policy.
Issue 01 (2012-03-15)
Run the display current-configuration | include notify-delay command to check the
delay for applying the routing policy.
CAUTION
Run reset ip ip-prefix [ ip-prefix-name ] command in the user view to clear the IPv4 prefix
list statistics.
Run reset ip ipv6-prefix [ ipv6-prefix-name ] command in the user view to clear the IPv6
prefix list statistics.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Routing Policy Configuration
616