Huawei S6700 Series Configuration Manual page 199
Ip routing
Hide thumbs
Also See for S6700 Series:
- Configuration manual (295 pages) ,
- Hardware description (115 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Switch A
Switch B
Switch B
Switch B
Switch C
Switch C
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Create VLANs and add corresponding interfaces to the VLANs.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 10
[SwitchA-vlan10] quit
[SwitchA] vlan 20
[SwitchA-vlan20] quit
[SwitchA] interface XGigabitEthernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchA-XGigabitEthernet0/0/1] quit
[SwitchA] interface XGigabitEthernet 0/0/2
[SwitchA-XGigabitEthernet0/0/2] port hybrid pvid vlan 20
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 20
[SwitchA-XGigabitEthernet0/0/2] quit
Issue 01 (2012-03-15)
XGE0/0/2
XGE0/0/1
XGE0/0/2
XGE0/0/3
XGE0/0/1
XGE0/0/2
Configure the basic OSPF functions on the Switch s.
Enable the BFD feature globally.
Enable BFD for OSPF on Switch A and Switch B.
ID of the VLAN that each interface belongs to, as shown in
IP address of each VLANIF interface, as shown in
Router ID and OSPF process ID of each Switch and network segments that OSPF interfaces
belong to:
– On Switch A, the router ID is 1.1.1.1; OSPF process ID is 1; the network segments of
Area 0 are 3.1.1.0/24 and 1.1.1.0/24.
– On Switch B, the router ID is 2.2.2.2; OSPF process ID is 1; the network segments of
Area 0 are 3.1.1.0/24, 2.2.2.0/24, and 172.16.1.0/24.
– On Switch C, the router ID is 3.3.3.3; the OSPF process ID is 1; the network segments
of Area 0 are 192.168.1.0/24 and 172.16.1.0/24.
Minimum interval for sending the BFD packets, minimum interval for receiving the BFD
packets, and local detection time multiplier on Switch A and Switch B
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 OSPF Configuration
VLANIF 20
3.3.3.1/24
VLANIF 30
2.2.2.2/24
VLANIF 20
3.3.3.2/24
VLANIF 40
172.16.1.1/24
VLANIF 10
1.1.1.2/24
VLANIF 30
2.2.2.1/24
Figure 4-13
Figure 4-13
180
Advertisement
Table of Contents
