Clearing Bgp Information; Configuration Examples; Example For Configuring Basic Bgp Functions - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

7.19.2 Clearing BGP Information

This section describes how to clear the statistics of BGP accounting, flapped routes, and
suppressed routes.
Context
BGP statistics cannot be restored after being cleared. Exercise caution when running this
command.
Procedure
l
l
l
----End

7.20 Configuration Examples

This section provides several configuration examples of BGP.

7.20.1 Example for Configuring Basic BGP Functions

Networking Requirements
As shown in
SwitchA and SwitchB. IBGP peer relationships are set up between SwitchB, SwitchC, and
SwitchD.
Issue 01 (2012-03-15)
CAUTION
Run the reset bgp flap-info [ regexp as-path-regexp | as-path-filter | ipv4-address
[ mask | mask-length ] ] command in the user view to clear the statistics of flapped routes.
Run the reset bgp dampening [ ipv4-address [ mask | mask-length ] ] command in the user
view to clear the dampened routes and advertise the suppressed routes.
Run the reset bgp ipv4-address flap-info command in the user view to clear the statistics
of route flapping.
Figure 7-4, all Switches run BGP. An EBGP peer relationship is set up between
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 BGP Configuration
443