Huawei S6700 Series Configuration Manual page 373

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
l
l
l
Figure 6-10 Networking diagram of basic IS-IS IPv6 feature
Area10
Switch
SwitchA
SwitchB
SwitchC
SwitchC
SwitchC
SwitchD
SwitchD
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Issue 01 (2012-03-15)
Switch A, Switch B, Switch C, and Switch D belong to the same AS. They are
interconnected through IS-IS in the IPv6 network.
Switch A, Switch B, and Switch C belong to area 10. Switch D belongs to area 20.
Switch A and Switch B are Level-1 routers. Switch C is a Level-1-2 router. Switch D is a
Level-2 router.
XGE0/0/1
10:1::2/64
SwitchA
L1
XGE0/0/1
10:1::1/64
XGE0/0/2
10:2::1/64
IS-IS
XGE0/0/1
10:2::2/64
SwitchB
L1
Interface
XGigabitEthernet0/0/1
XGigabitEthernet0/0/1
XGigabitEthernet0/0/1
XGigabitEthernet0/0/2
XGigabitEthernet0/0/3
XGigabitEthernet0/0/1
XGigabitEthernet0/0/2
Enable the capability of IPv6 forwarding on each switch.
Configure an IPv6 address for each interface.
Enable IS-IS on each switch.
Configure the level.
Specify the network entity.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
XGE0/0/3
30::1/64
XGE0/0/1
SwitchC 30::2/64
L1/L2
6 IS-IS Configuration
XGE0/0/2
20::1/64
SwitchD
L2
IS-IS
Area20
VLANIF interface IP address
VLANIF 10 10:1::2/64
VLANIF 20 10:2::2/64
VLANIF 10 10:1::1/64
VLANIF 20 10:2::1/64
VLANIF 30 30::1/64
VLANIF 30 30::2/64
VLANIF 40 20::1/64
354