Huawei S6700 Series Configuration Manual page 181

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Figure 4-10 Networking diagram for configuring OSPF GR
Switch
Switch A
Switch B
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure the basic OSPF functions. See Example for Configuring Basic OSPF Functions.
Step 2 Configure the Opaque LSA function.
[SwitchA] ospf
[SwitchA-ospf-1] opaque-capability enable
# Configure SwitchB.
[SwitchB] ospf
[SwitchB-ospf-1] opaque-capability enable
Step 3 Configure the OSPF GR feature.
Issue 01 (2012-03-15)
SwitchA
XGE0/0/1
XGE0/0/1
Area 0
Interface
XGigabitEthernet0/0/1
XGigabitEthernet0/0/1
Configure the basic OSPF functions on each Switch to implement interconnection.
Enable the Opaque LSA function.
Configure GR on each Switch.
ID of the VLAN that each interface belongs to, as shown in
IP address of each VLANIF interface, as shown in
Router ID and OSPF process ID of each Switch and area that each interface belongs to:
– On Switch A, the router ID is 1.1.1.1; the OSPF process ID is 1; the network segment
of Area 0 is 1.1.1.0/24.
– On Switch B, the router ID is 2.2.2.2; OSPF process ID is 1; the network segment of
Area 0 is 1.1.1.0/24.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchB
4 OSPF Configuration
VLANIF interface IP address
VLANIF 10 1.1.1.1/24
VLANIF 10 1.1.1.2/24
Figure 4-10
Figure 4-10
162